???? ??????:

1. ????:
?????????, ??????????, ????? ??????????, ???????? ????? ??? ???????? ??????????????? ???? ??????? ????? ??????? ?????????????? XFDII ??????? ????????? ?????????? ?????????????? ????????????.
2.Structure Introduction:
XFDII series flotation machine is composed of the following main components

.

????? ????????? ??????? ??????????????, ????? ????? ?????? ??????? ?????? ???? ??????????? ???? ???? ??????? ????????? ?????????? ????????????????? ???????????; The rotation of the scraper is driven by the scraper motor through the pulley, and the position of the scraper can be adjusted by the dish nut.

3.Operation Sequence:

1), ????????? ?????????? ???????? ????????? ???????????;?
2),Test boot:
???????? ??????????? ????????? ?????????, ??????????????????????, ???????????, ???????? ???????? ???? ???????????? ???????????, ????????? ????? ????????????????? ??????????? ???? ???? ????? ??????????????.
????? ???? ????? ????? ????? ??????????? ??????????? ????????, ????? ????? ??????????, ???????? ???????????, ?????????????? ????????? ??????? ???????????????, ?????? ?????????????? ????????? ???????????, ???????? ?????? ????? ??????? ????, ???? ????? ?????????. ????????? ????? ????????? ????????? ?????? ?????? ??? ????, ???? ???? ????? ???????? ???????????, ????? ????????????? ????? ????? ???? ?????????????, ????????? ???? ???? ????? ?????????? ????????, ???? ???????? ???? ???????????? ?????????.

?4. ?????? ????????? ??????????:

1. ??????????? ??????????? ?????? ????, ????????? ??????????? ?????????? ??????? ??????? ?????????? ??????????? ?????? ????????????? ??????????????.
2. If the frequency converter needs to be started, press the green button (RUN) on the operation box to start the frequency converter.
3. If speed regulation is needed, the potentiometer can be rotated on the operation panel. The clockwise direction is the maximum speed, and the reverse direction is zero (normal speed display 0-2800).
4. ????????? ???????? ????, ????? ?????????? ????? (????????/??????????).
5. If the operation box of the converter shows abnormal English letters, it can be RESET by pressing the red button (STOP/RESET). If it cannot be reset, it can be powered off until there is no display on the panel.
6. Please read the user manual for specific parameter modification and frequency converter connection.

?5. ?????? ???????? ???? ????????? ??????????? ????.

?6. ?????????? ????? ????????:

1), ????? ????? ?????, ???? ????? ?????????????????, ????????? ??????????? ????? ?????? ??????, ?????? ??????, ?????? ???? ????? ????????????????? ???? ???? ????? ????????????.
2),Lubricating oil should be added to the joint of each rotation, and grease should be changed at least once in three months at the bearing. (The melting point of grease should be greater than or equal to 100 degrees)
3),After each use, to clean the tank body, impeller, and dry; Keep the machine durable, clean and beautiful.
.
5),Moving the flotation machine, the point of emphasis should be on the body, not on any parts, so as to avoid damage.
6),Working temperature of flotation tank is 15-50 degrees
7),The heating rod is prohibited from running without pulp.

Eight. List of vulnerable parts:

?