Installation:
1,machine should be placed on the solid work, mesa level shall be maintained.
2, the machine installation location must be backed by a 380 v three-phase ac power supply, vertical axis rotation direction should be paid attention to when the motor wiring.
3, in order to ensure the convenience and safety in production work, should be considered for mining, mining, check, etc., without shoes, can the body touch the machine all position is advisable.
4, should through the magnetic switch, make the current on motor and rotation.
5, prior to installation of the machine, should be the anticorrosive grease rub-up.

Plus pulp of commissioning:
1, one by one on the motor, determine the spin to the right (main motor for a right-handed, scraper motor for left-handed)
2, used rubber hose plug into mine tube, pipe and the foam tank, ready for cheng fang concentrate at all levels of the container; Connect the prepared pulp, start each motor, adjust the handwheel of the middle ore box, regulate the liquid level of the pulp and the thickness of the foam layer scraped out, observe the operation of each component of the machine, and wait quietly for the completion of the flotation operation. Outside the bottom of the tank, there is a ore cleaning pipe. When cleaning the tank after the operation is completed, remove the rubber stopper and drain the water for rinsing. Middling box installation position and direction, can change process.

The lubrication machine has the following point:
1,Impeller shaft adopts the centripetal roller bearing, should inject high quality thick and lubricating grease, oil change once every six months.
2,Usage of scraper shaft according to inject a small amount of lubricating oil.

Note: each time an oil change oil seal must be tight, don't give too much oil, leaking tub in pulp and pure.