Main structure

The main machine is composed of ore feeding device, weak magnetic roller, transmission part, material conveying device, disk, electromagnetic system, frame and so on. The electric control part is composed of control, voltage regulation, rectification, instrument and other components. Compact structure, stable performance, easy installation, easy to use and maintain.

Installation

1,All new installation or installation after relocation, it is necessary to carry out routine inspection of the mechanical and electrical parts, and pay attention to whether the parts are damaged, loose, damp, etc. Place the magnetic separator horizontally.

2,Install the electrical console in a place that is easy to operate and observe. Connect the ground wire as usual.

3,The knife switch outside the console is connected to the 25 amp fuse, the four core of the power supply is the black line in the cable and the zero line, the connection between the host and the console is connected by the same number

Attention

1,When the magnetic separator is working, the strong magnetic tools and items should not be close to the magnetic system, and the operator should not touch the rotating parts and wire joints to avoid safety accidents

2,When adjusting the working gap of the disk, the disk tooth tip should be kept at an appropriate distance from the conveyor belt to avoid damaging the conveyor belt.

3,During the operation of the magnetic separator, do not let the motor work without phase. When the motor running sound is abnormal, it should be stopped in time to check the power line


Product video